MLPerf® Training V4.0:
DLRMv2

DLRMv2 (Deep Learning Recommendation Model v2) is a machine learning model designed to provide personalized recommendations based on user behavior and item features. It incorporates various deep learning techniques to capture complex interactions between users and items, enabling more accurate and relevant recommendations for online platforms like e-commerce or streaming services.

Footnotes: see Disclaimer & Footnotes section below.

The as-submitted results for MLPerf® Training V4.0 for H100 SXM systems.

Verified Power results for MLPerf® Training V4.0 submitters. For more detail on how this was captured, refer to sections above

Parameters used in the benchmark run (across all nodes)

Compute node hardware specifications.

Test location & environmental conditions present at test.

External storage cluster used in benchmark run.

Compute and storage network details.

Overhead allocation of power for networking to test results¹

Disclaimer & Validity - MLCommons

MLPerf® Training v4.0 Closed DLRMv2 offline. Retrieved from https://mlcommons.org/benchmarks/training/ 12 June 2024. Result verified by MLCommons Association. The MLPerf® name and logo are registered and unregistered trademarks of MLCommons Association in the United States and other countries. All rights reserved. Unauthorized use strictly prohibited. See www.mlcommons.org for more information.

Footnotes

1. Network power allocation: To accurately capture the total power envelope of multi-node tests, it is appropriate to measure the power consumption of networking equipment that is associated with the test. For MLPerf® Training V4.0, a method of proportional allocation of total network power was adopted by the members. For our submission, the following methodology was used and accepted: SMC has a 'Scalable Unit' ('SU') of 6 nodes in 3 bays with a pair of nodes in each bay. Each SU consists of 2 QM9790 64-port Leaf switches, Leaf A and Leaf B. Four out of eight CX-7 NICs in each of the six nodes connect to Leaf A, and the other four CX-7s connect to Leaf B. 16 ports from each Leaf switch connect to 16 Spine switches Spine 01 – Spine 16. Power consumption per switch: 1610W. Port Utilization for leaf switches: (16+4*Num_used_nodes)/64 ports (16 upstream, 24 downstream). Port utilization for spine switches: 2*Number of SUs (each SU has 2 leaf switches each of which connects to 1 port of a spine switch).
   
   Power consumption by cluster size: 8 nodes - 2SUs; 6N in SU1, 2N in SU2 - Total interconnect power 16,100 W. 9 nodes - 2SUs; 6N in SU1, 3N in SU2 - Total interconnect power 16,100 W. 64 nodes - 11 SUs; 6N in SU1-10, 4N in SU11 - Total interconnect power 59,570 W
   
   For each cluster, based on the size, power has been apportioned pro-rata by the time taken to complete the benchmark test. For example, a hypothetical 8 node test that took 15 minutes to complete has its power apportioned as follows: (15/60) * 16,600 = 4,025 W. Measurements: 1 Watt equals 1 Joule per second. 1 kWh equals 3,600,000 Joules.
   
   
2. Node power: SMC records and submits DC power via monitoring of power rectifiers that are upstream of the node. SMC nodes are immersed in HyperCube immersion tanks, arranged in 3 bays, each containing 2 H100 SXM nodes (16 GPUs). Each node is powered by a common 54V bus per bay, with each bus supporting 2 nodes. Each bus is connected to two HyperCube powershelves, equipped with 4 x 5.0 kW power rectifiers. Each rectifier reports statistics, including input/output voltage, current, power and temperature over a CAN bus. This information is available via an HTTP REST endpoint, which is polled and logged at 1 second intervals.
   
   For MLPerf® Training V4.0 results. All runs for all tests were polled and written to an SQLite database. For MLCommons members, the raw data collected was submitted along with our results and verified as accurate and true. The total Joules submitted to MLCommons and displayed on this page include a verified proportion for overhead allowance of networking power, as calculated above.
   
   In instances where Watt, Kilowatt or Kilowatt-hour are displayed, a relevant conversion from Joules and time to complete has been performed.
   
   
3. Data Centre PUE & CO₂ calculations: Data centre PUE calculations are not in scope of the MLPerf Training V4.0 results, and have not been peer reviewed. Data relating to pPUE and PUE is presented based on our own measurements, which includes calculations using industry standard methodology. HyperCube pPUE: Partial PUE considers the load within the HyperCube and does not consider any of the supporting infrastructure to support the data centre. The observed pPUE of 1.02 is representative of the system's core efficiency gains through the elimination of the fans and chilled water infrastructure to support the main HPC heatload. The Partial PUE includes cooling water pumps, fluid pumps and cooling tower fan energy. Extrapolated PUE: This grossed up calculation embodies total facility losses to operate a HyperCube data hall, including an apportionment of total facility power. An extrapolated PUE of 1.10 is calculated as the SIN02 deployment approaches full capacity. These real-world values were recorded at the time of conducting an assessment based on Greenmark standards. The estimated values are extrapolated from this data and incorporate electrical efficiencies which will be regained with the increased loading of UPS and TX.
   
   Carbon (CO2) calculations: extrapolation of the direct power consumed during the relevant benchmark, including net power required at the data center level, multiplied by the energy grid carbon coefficient present during the test.